- UL/CUL and CE approved with Class 1, Division II, Group A, B, C and D hazardous location rating
- Non-contact position sensing – no mechanical switches to wear out
- Robust design engineered for 100% modulation and open/close operation
- Electronic power backup option powers actuator enabling it to return to pre-programmed safe position in the event of loss of control signal or power
- Life expectancy of power backup option is greater than 10 years due to super capacitor technology
- Customizable speed settings – each model may be customized to fit your open/close speed needs
- High number of starts per hour – can exceed 6000 starts per hour
- Permanently lubricated drive train
- 4 models available: 500, 1200, 2500, or 5000 in-lbs torque
- Easily programmable start and stop points
- ISO 5211 direct mounting for F07 and F10 compatible valves
- Each model may be configured for 24VAC/24VDC, 48VDC, or 100VAC to 240VAC input power
- 2 year warranty
- All models designed to fit in same compact footprint
- Gearbox options: 500, 1200, 2500 or 5000 in/lb
- Precision: 0.5 degree using 4-20mA; 0.3 degree using MOBUS (both RTU and TCP available)
- Operating temperature: -22°F to 140°F
- Mounting: ISO 5211 F07 & F10 compatible
- Input power: 24VAC/24VDC, 48VDC, 120-240 VAC
- System protection:
– 4-20mA input protected to 240VAC
– 4-20mA output protected to 24VDC
– 24VAC/24VDC module input protected to 240VAC
– 48VDC module input protected to 240VAC
– Isolated MOBUS ground
- Network: ethernet port standard
- Status output: relay outputs allow for external monitoring of Open, Closed or Error status; MOBUS allows external monitoring of all supported product status flags
- Drive speed: Programmable, unit shipped at 70% of max gearbox speed
- Modular design: control module and SuperCap/Power Supply module are designed to be field replaceable so that in the event of a failure, a new module may be inserted into the actuator without having to detach the actuator from the valve
- SuperCap backup
- AC in power supply
- CE certified
- UL/CUL certified
- UL Class 1, Div 2, Groups A, B, C, D Hazardous Location Rated
- Designed for use with PLCs and control systems requiring constant movement and high duty cycle
